Identifier GUID-E3D5A4DB-BAB5-4F6F-B7B6-8BC4EF0CC57D
Status Released
Replacing the display hinges
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-7E4B92E1-B7DB-474B-8E6E-6DE5811E88E7
Status Released
Procedure
1 Align the screw holes on the display hinges with the screw holes on the display
assembly.
2 Replace the six screws (M2.5x5) that secure the display hinges to the display
assembly.
3 Adhere the tape to the display hinges.
Identifier GUID-596D1D1C-5598-4B51-A19E-E26E5C6F7EA5
Status Released
Post-requisites
1 Replace the antenna cover.
2 Replace the display assembly.
3 Replace the wireless card.
4 Replace the battery (half-length) or the battery (full-length).
5 Replace the base cover.
96
To Next Page
Loading...
