Identifier GUID-5E22F4A0-F01F-4522-8155-BE22A8CA6E5F
Status Released
Replacing the coin-cell battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-A26355E1-1177-48A1-86DE-85C0637849C0
Status Released
Procedure
1 Adhere the coin-cell battery to the system board.
2 Connect the coin-cell battery cable to the system board.
3 Turn the system board over.
Identifier GUID-4EB5EDC2-D30F-4CBF-A7C9-99B10F18D946
Status Released
Post-requisites
1 Replace the system board.
2 Replace the memory modules.
3 Replace the heat-sink assembly.
4 Replace the fans.
5 Replace the solid-state drive (half-length) or the solid-state drive (full-length).
6 Follow the procedure from step 3 to step 6 in “Replacing the hard drive”.
7 Replace the wireless card.
8 Replace the battery (half-length) or the battery (full-length).
74