7 Replace the screw (M2x2) that secures the display-cable bracket to the system
board.
Identifier GUID-089EE999-93A9-452E-8B02-09D8FCFB7C90
Status Released
Post-requisites
1 Replace the memory modules.
2 Replace the heat-sink assembly.
3 Replace the fans.
4 Replace the solid-state drive (half-length) or the solid-state drive (full-length).
5 Follow the procedure from step 3 to step 6 in “Replacing the hard drive”.
6 Replace the wireless card.
7 Replace the battery (half-length) or the battery (full-length).
8 Replace the base cover.
67
To Next Page
Loading...
