Identifier GUID-A84F666A-38B4-4C77-A8DE-7910F5831300
Status Released
Removing the antenna module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-892244E2-6E72-43F7-B7E4-E161D5995363
Status Released
Prerequisites
NOTE: These instructions are applicable only for laptops with a non-
touchscreen display.
1 Remove the base cover.
2 Remove the battery (half-length) or the battery (full-length).
3 Remove the wireless card.
4 Remove the display assembly.
5 Remove the antenna cover.
Identifier GUID-941A9399-CB90-4058-A802-7987DC7ECD57
Status Released
Procedure
1 Peel the tape that covers the antenna cables.
2 Remove the four screws (M2x4) that secure the antenna module to the display
assembly.
97
To Next Page
Loading...
