Dell XPS 27 - Replacing the Speakers; Procedure; Post-Requisites

Replacing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the screw holes on the speakers with the screw holes on the middle frame.
2 Replace the eight screws (M3x4) that secure the speakers to the middle frame.
3 Route the cable through the routing guides on middle frame and connect the
speaker cable to the system board.
Post-requisites
1 Replace the inner frame.
2 Replace the stand.
3 Replace the system-board shield.
4 Replace the back cover.
5 Replace the USB dongle-bay cover.
102