Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Connect the camera cable to the camera assembly.
2 Turn the camera assembly and route the camera cable through the routing guide
on the middle frame.
3 Align the screw holes on the camera assembly with the screw holes on the
middle frame.
4 Replace the two screws (M2X3) that secure camera assembly to the middle
frame.
Post-requisites
1 Replace the speakers.
2 Replace the inner frame.
3 Replace the stand.
4 Replace the back cover.
5 Replace the USB dongle-bay cover.
111
To Next Page
Loading...
