Removing the display panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the USB dongle-bay cover.
2 Remove the back cover.
3 Remove the memory modules.
4 Remove the hard drive.
5 Remove the stand.
6 Remove the system-board shield.
7 Remove the chassis fan.
8 Remove the wireless card.
9 Remove the power-supply unit.
10 Remove the memory fan.
11 Remove the inner frame.
12 Remove the microphones.
13 Remove the I/O panel.
14 Remove the processor heat-sink.
15 Remove the processor.
16 Remove the hard-drive cage.
17 Remove the coin-cell battery.
18 Remove the solid-state drive.
19 Remove the converter board.
20 Remove the speakers.
21 Remove the power-button board.
22 Remove the media-card reader.
131