Dell XPS 27 - Replacing the Media-Card Reader; Procedure; Post-Requisites

Replacing the media-card reader
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Connect the audio cable to the media card.
2 Connect the media-card reader cable to the media-card.
3 Align the media-card reader to the slot on the middle frame.
4 Align the screw hole on the media-card reader shield to the screw hole on the
middle frame.
5 Replace the two screws (M2X3) that secure the media-card reader shield to the
middle frame.
Post-requisites
1 Replace the speakers.
2 Replace the inner frame.
3 Replace the stand.
4 Replace the back cover.
5 Replace the USB dongle-bay cover.
108