Dell XPS 27 - Procedure

14 Remove the solid-state drive.
Procedure
NOTE: To avoid any potential damage to the cables, ensure to release them
from the routing guides.
1 Using the pull tab, disconnect the display cable from the system board.
2 Disconnect the camera cable from the system board.
3 Disconnect the touch cable (applicable only for systems with the touch screen
option) from the system board.
4 Using the pull tab, disconnect the media-card reader cable from the system
board.
5 Disconnect the hard-drive power cable from the system board.
6 Disconnect the hard-drive data cables from the system board.
7 Disconnect the microphone cable from the system board.
8 Disconnect the speaker cable from the system board.
9 Disconnect the converter-board cable from the system board.
113