Removing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the USB dongle-bay cover.
2 Remove the back cover.
3 Remove the stand.
4 Remove the inner frame.
5 Remove the speakers.
Procedure
1 Remove the two screws (M2X3) that secure the camera assembly to the middle
frame.
2 Remove the camera cable from the routing guide on the middle frame.
3 Lift the metal foil and turn the camera assembly over.
109
To Next Page
Loading...
