Removing the stand
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the USB dongle-bay cover.
2 Remove the back cover.
Procedure
NOTE: The process for removing and replacing the stand will be same for
articulating stand and pedestal stand.
1 Remove the six screws (M4X6) that secure the stand to the middle frame.
59
To Next Page
Loading...
