Dell XPS 27 - Removing the Hard-Drive Cage; Prerequisites; Procedure

Removing the hard-drive cage
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the USB dongle-bay cover.
2 Remove the back cover.
3 Remove the stand.
4 Remove the hard drive.
5 Remove the system-board shield.
6 Remove the I/O panel.
Procedure
1 Remove the cable from the routing guide on hard-drive cage.
2 Open the securing clips and release the hard drive cables.
3 Disconnect the hard-drive power cable from the system board.
92