Dell XPS 27 - Removing the Converter Board; Prerequisites; Procedure

Removing the converter board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the USB dongle-bay cover.
2 Remove the back cover.
3 Remove the stand.
4 Remove the system-board shield.
5 Remove the inner frame.
6 Remove the I/O panel.
Procedure
1 Disconnect the right backlight power cable from the converter board.
2 Disconnect the converter-board cable from the converter board.
96