Removing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the USB dongle-bay cover.
2 Remove the back cover.
3 Remove the system-board shield.
4 Remove the stand.
5 Remove the inner frame.
Procedure
1 Disconnect the speaker cable from the system board and release it from the
routing guides on middle frame.
2 Remove the eight screws (M3x4) that secure the speakers to the middle frame.
100
To Next Page
Loading...
