Dell XPS 27 - Replacing the Memory Fan; Procedure; Post-Requisites

Replacing the memory fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Connect the memory fan cable to the system board.
2 Align the screw holes on the memory fan with the screw holes on the system
board.
3 Replace the four screws (M2X3) that secure the memory fan to the system
board.
Post-requisites
1 Replace the system-board shield.
2 Replace the back cover.
3 Replace the USB dongle-bay cover.
41