Dell XPS 27 - Removing the Media-Card Reader; Prerequisites; Procedure

Removing the media-card reader
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the USB dongle-bay cover.
2 Remove the back cover.
3 Remove the stand.
4 Remove the inner frame.
5 Remove the speakers.
Procedure
1 Remove two screws (M2X3) that secure the media-card reader shield to the
middle frame.
2 Lift the media-card reader shield off the middle frame.
3 Lift the media-card off from the slot on the middle frame.
4 Disconnect the media-card reader cable from the media-card.
106