Dell XPS 27 - Replacing the Inner Frame; Procedure; Post-Requisites

Replacing the inner frame
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the screw holes on the inner frame with the screw holes on the middle
frame.
2 Replace the screws (M3X4) that secure the inner frame to the middle frame.
NOTE: Touch screen has 14 screws and non-touch screen has 20
screws that secure the inner frame to the middle frame.
Post-requisites
1 Replace the stand.
2 Replace the back cover.
3 Replace the USB dongle-bay cover.
73