Dell XPS 27 - Replacing the Converter Board; Procedure; Post-Requisites

Replacing the converter board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the screw holes on the converter board with the screw holes on the middle
frame.
2 Replace the three screws (M3X4) that secure the converter board to the middle
frame.
3 Connect the converter-board cable to the converter board.
4 Connect the backlight power cables to the converter board.
Post-requisites
1 Replace the I/O panel.
2 Replace the inner frame.
3 Replace the system-board shield.
4 Replace the stand.
5 Replace the back cover.
6 Replace the USB dongle-bay cover.
99