Chapter 3 Creating and Editing Screens
Revision May, 2010 3-97
Property Description of General Buttons
Blink
The element can blink to remind the user.
The user can decide if the element blinks or not when the button is
set to be ON or OFF state. The blinking
color is the relative color of
the button’s state. For the method for switching ON or OFF state of
the button, please refer to the figure shown below.
Bank (Picture Bank)
Picture Name
The user can determine the picture of the element by clicking
“Bank”(Picture Bank). (If “Bank” has been selected, the user can
click “Picture Name” to determine the picture of the element). The
following dialog box will display when the user selects the existing
Picture Bank Name from the drop-down list.
To Next Page
Loading...