Chapter 3 Creating and Editing Screens
3.6.15 Make Same Size
This command makes the element to be the same size. The users must select one element
first as reference object, and then select other elements. To use this function, select Edit >
Make Same Size or click the make same size icons in the toolbar.
3.6.16 Text Process
This command aligns the text. To use this function, select Edit > Text Process or click the
text process icons in the toolbar. In the Import Text dialog box, the user can decide if use
Text Bank Edit Font or not. If the user checks the box next to Text Bank Edit Font, the
imported text will be display by adopting the fonts of Text Bank. For the settings of Text Bank,
please refer to Options > Text Bank.
3.6.17 Picture
next to the Picture command represents that this function is enabled. To use this function,
select Edit > Picture or click the picture icons in the toolbar. The users can also use the
functions of Bitmap Toolbar to perform Picture commands.
3.6.18 Duplicate
To copy one or more elements at the same time, select Edit > Duplicate. After the user has
selected this command, the Duplicate dialog box is displayed (Fig. 3-6-7). The user can enter
the number of columns and rows to get the total copy numbers. The minimum entry number
must be more than 2 as the original element is included in the total copy number.
If the user wants to copy only the rows, uncheck the box next to columns. If the user wants to
copy only the columns, uncheck the box to rows.
To set the spacing between every element, set the pixel count in the Spacing field.
To place the copied element by ascending or descending address, click the Increase Address
or Decrease Address button. The unit of the address can be Word or Bit. To place the copied
element by the horizontal (X-direction) or vertical (Y-direction) direction, click the X-Direction
or Y-Direction button (Please refer to the example 1 and 2 in Fig. 3-6-8 and Fig. 3-6-9).
3-58 Revision May, 2010
To Next Page
Loading...