Chapter 3 Creating and Editing Screens
Fig. 3-7-16 Element Part List dialog box
3.7.12 Memory List
There are four items in memory list:
1. ROM: It is the location where recipe data and screen data are stored.
2. SRAM: It is the location where non-volatile data is stored.
When there are history and alarm, etc. data in the project, the user can check the
memory space in this area.
3. SDARM: It is the location where HMI executes the project. To get this information, the
user must create a project and compile it first.
4. External Storage: It indicates the external memory is used. When the non-volatile data is
stored in external memory, i.e. USB disk, the data stored in SRAM will be moved to
external memory area.
3-76 Revision May, 2010
To Next Page
Loading...