Chapter 3 Creating and Editing Screens
Revision May, 2010 3-137
3.8.8 Data Display Elements
Fig. 3-8-25 Data Display Elements
3.8.8.1 Numeric Display
Property Description of Numeric Display Element
This element will read the value of the setting address and display the read value
immediately in the format set by the user.
Read Address
The address can be internal memory or the controller address.
(Please refer to Table 3-8-2 Property Description of General Buttons.)
Text Size
Text Color
The user can set the text size and text color that provided by HMI to
determine the text display on the element. HMI provides 8~64 kinds
of default text font for the user to use.
Border Color
Background
Color
Border Color option can be set only
when the style of the numeric
display element is selected as Raised and Sunken. The style of the
element below is selected as “Sunken”. Its background color is set to
green and its border color is set to red.
(If the style of the element is set to Transparent, the Border Color
and Background Color these two options are disabled.)
Standard Raised Sunken Transparent
Style
Leading Zero
The following figures show the difference if the user selects the
Leading Zero option. (Please note that the integral digit is set to 4
digits.)
(If YES is selected)
(If NO is selected)
To Next Page
Loading...