Chapter 3 Creating and Editing Screens
3-104 Revision May, 2010
Property Description of Set Value Buttons
Info the overrange
message
When this option is set, an Error dialog box will appear to prompt
the user the input value has exceeded the limit of the range
setting.
Invisible Address
When this option is set to On, this button element will be
invisible.
X Used to set X coordinate
Y Used to set Y coordinate
Width Used to set the element width
Height Used to set the element height
3.8.2.4 Set Constant Button
Property Description of Set Constant Buttons
After pressing this button on the screen, HMI will send the specified constant value to
PLC corresponding register. It has the same function as Set Value button. The user can
also specify the trigger mode to trigger the designated PLC address before or after
writing the setting value.
Write Address
The address can be internal memory or the controller address.
(Please refer to Table 3-8-2 Property Description of General
Buttons.)
Text
Text Size
Font
Text Color
The user can set the text, text size, font and text color provided by
Windows® to determine the text display on the element (Please
refer to Table 3-8-2 Property Description of General Buttons.)
Bank (Picture Bank)
Picture Name
(Please refer to Table 3-8-2 Property Description of General
Buttons.)
Transparent Effect
Transparent Color
(Please refer to Table 3-8-2 Property Description of General
Buttons.)
Foreground Color
Style
(Please refer to Table 3-8-2 Property Description of General
Buttons.)
To Next Page
Loading...