Delta Electronics DUP-B Series User Manual

Chapter 3 Creating and Editing Screens
3.14.3.4 Data Conversion
There are various kinds of commands for data conversion. For more details, please
refer to the following sections.
 BCD (Convert BIN Data into BCD Value)
Equation
Var1 = BCD (Var2)
Explanation
The binary data in Var2 is converted into a BCD value and stored in Var1.
Remark
 The calculation result can be stored as unsigned WORD or DWORD.
 Var1 and Var2 can be internal memory only.
Example
After executing BCD command, the binary data in $0 is converted to a BCD value and
stored in $1 (this is an operation of unsigned 16-bit data).
Revision May, 2010 3-333

Delta Electronics DUP-B Series Specifications

General

Brand	Delta Electronics
Model	DUP-B Series
Category	Control Panel
Language	English