Appendix A List of Functions Added
A.10 USBCommMode (Data Transfer via USB Disk)
USBCommMode is a new option provided in HMI System Menu and used to transfer (upload and
download) the data via USB disk. After the firmware is updated, the user can press SYS key to
enter into the System Menu. Touch System Setting icon on the screen to enter into System
Setting Menu. In the System Setting Menu, choose MISC. icon shown as the figure below. Then,
change the setting value of USBCommMode to 1 and connect HMI to PC USB port again.
Touch MISC. icon
Sele
ct USBCommMode option
Revision May, 2010 A-19
To Next Page
Loading...