Delta Electronics DUP-B Series - Screen Cycle Macro

Chapter 3 Creating and Editing Screens
3.14.1.7 Screen Cycle Macro
The user can use Screen Cycle Macro to cycle each screen. Each screen has a Screen
Cycle Macro and it can be executed repeatedly for a specified period of cycle time. The
user can set the Macro Cycle Delay Time, i.e. the delay time every time between the end
and restart of Screen Cycle Macro in Screen Properties dialog box (See Fig. 3-14-2). The
system default setting is 100ms.
Fig. 3-
14-2 Macro Cycle Delay Time
Open the Screen (Execute Screen Open Macro)
Execute Screen Cycle Macro
Set cycle delay time to 100ms
(
This settin
g
can be user-defined
)
After Screen Close
Macro is executed
Open a screen or
swit
ch
to a new
screen
After Screen Open
Macro is executed
Perform other ations
on the screen
When the user wants to
close or switch the screen
Repeat
After Screen Cycle Macro
is executed
Close the Screen (Execute Screen Close Macro)
Revision May, 2010 3-283