Chapter 3 Creating and Editing Screens
Revision May, 2010 3-289
3.14.2 Macro Editing
3.14.2.1 Macro Editing Widow and Toolbar
After choosing the desired Macro command from the menu bar, the user can start
editing the Macro by clicking any line in the editing window shown in Fig. 3-14-10.
Please note that Each macro is capable of containing 512 lines of code with a
maximum of 128 characters per line.
Fig. 3-14-10 Macro Editing Window
he user can also use the icons on the toolbar (Fig. 3-14-11) for Macro editing.
T
Fig. 3-14-11 M cro Toolbar a
Macro Editing Area
Open Macro
Save Macro
Cut
Syntax Check
Update
Copy
Past
e
Wizard
To Next Page
Loading...