Chapter 3 Creating and Editing Screens
the user’s screen will look like the figure shown below.
3.14.3.10 Others
For more details of other macro commands, please refer to the following sections.
Time Tick (Get the Time from System Startup to Present)
Equation
Var1=TIMETICK
Explanation
This command is used to get the time from system startup to present and save into
the specified address. The time unit is ms.
Remark
Var1 can be internal memory only.
Example
Get the time from system startup to present and save into $0.
Revision May, 2010 3-369
To Next Page
Loading...