Chapter 3 Creating and Editing Screens
Hard Copy Function
This function is available only when the screen is a General View Screen. If HMI
detects the Print Typesetting function is already set for the editing screen, the Hard
Copy function will be ineffective.
Step 1. Set the Hard Copy Region in Screen Properties dialog box.
Step 2. Enable Print Function
Create a Report List button on a General View Screen. Use this Report List
button to enable the print function.
Step 3. Connect HMI to the printer and press Report List button, and the printer will
start to print data out.
Revision May, 2010 3-253
To Next Page
Loading...