Delta Electronics DUP-B Series User Manual

Chapter 3 Creating and Editing Screens
 BITNOT (Set Specific Bit to be Inversed. ON to OFF, OFF to ON)
Equation
BITNOT Var1
Explanation
This command sets the specific Bit to be inversed. ON to OFF, OFF to ON
Remark
 Var1 can be the controller address or internal memory (BIT).
Example
Set the 5th Bit within the internal memory $0 to be inversed.
If $0 = 1111111111111111, after the operation, $0 = 1111111111101111
 GETB (Get Bit value)
Equation
Var1 = GETB Var2
Explanation
This command gets Var2 Bit value and store in Var1
Remark
 Var1 and Var2 can be the controller address or internal memory (BIT).
Example
Get the 5th Bit value within the internal memory $0 and store it to the 5th Bit value
within the internal memory $1.
If $0 = 1111111111111111 and $1 = 0000000000000000, after the operation, $1
= 0000000000010000.
Revision May, 2010 3-353

Delta Electronics DUP-B Series Specifications

General

Brand	Delta Electronics
Model	DUP-B Series
Category	Control Panel
Language	English