Ethernet Communication Module IFD9506
DVP-PLC Operation Manual
Returning to default settings
Check “Factory Setting” box and click “ Ye s” to return all parameters to the factory settings.
Notes:
You can return settings to factory default ones by RS-232 port whether the password is locked or not. It will
take approximately 10 seconds to return to default settings, so DO NOT switch off the power within the 10
seconds. Besides, you can also press “Reset” button for 2 seconds to return to default settings.
Please power IFD9506 on again after returning to factory settings is done.
To Next Page
Loading...
Need help?
General