Delta Electronics IFD9506 User Manual

Ethernet Communication Module IFD9506
DVP-PLC Operation Manual
19
5.2 Basic Settings
The basic settings include parameters such as module name, network settings and serial communication.
1. Module name:
There can be many IFD9506 modules on the network. Thus, you can set a module name for each modul
e
t
o identify the module when you need to use them.
2. Master configuration:
You can choose “Serial Master” mode or “Serial Slave” mode or “Serial Device Server” mode here. Refer
to Chapter 6 for the explanation of modes.
3. Network setup:
Enable DHCP or static IP. Consult your ISP for other relevant settings.
a) IP configuration:

Delta Electronics IFD9506 Specifications

General

Brand	Delta Electronics
Model	IFD9506
Category	Control Unit
Language	English