Delta Electronics IFD9506 User Manual

Ethernet Communication Module IFD9506
DVP-PLC Operation Manual
51
9.6 Save Configuration
After modification of setting values is made, you must press “Apply” and save the settings by click “Save” on this
page.
9.7 System Setup
9.7.1 Firmware Update
Click “Switch” to automatically switch to the engineering mode. DO NOT update the firmware by yourself. If you
need update the firmware, please contact Delta factory or agent for confirmation and further operation.
9.7.2 Factory Setting
After restoring the parameters to the factory values, please power the module on again before use. Be aware that
some of the parameters will keep the values set by rotary switches after the power is on again.

Delta Electronics IFD9506 Specifications

General

Brand	Delta Electronics
Model	IFD9506
Category	Control Unit
Language	English