Modulon NH Plus Series
7-3
7-3 Default Screen
After the UPS starts up and completes the self test, the screen will show as below.
1. When any event occurs, you will see the sign “!” flashes. You can press “
” to
see the details. For example:
Press “
” again will go to the next message. If there is no further message, the
screen will return to the default screen.
2. Press “ESC” at any time will return to the default screen.
P 2008- 10 -02ROTECTEDLOAD UN
UN I T : # 1 . 1
11: 59:59BYPAS SON AUTO
RPTOBROWSEEVENT(004)SES
!
BYPA.
MAINS
To Next Page
Loading...
