Delta Electronics NH Plus Series

7
Η
Display and Configuration
7-12
a. BYPASS SETUP
Use “j” or ”i” to select “BYPASS”, then press ”
” to confirm.
1. Use “j” or ”i” to select “VOLT
RANGE” or “FREQ RANGE", then
press ”
” to confirm.
2. Use “j” or ”i” to select the voltage
range, then press ”
” to confirm.
3. Use “j” or ”i” to select the
frequency range, then press ”
” to
confirm.
Press “ESC” to return to the “UPS SETUP” menu.