September, 2015 2-1
Installation
This chapter allows you to properly install the device. Please follow the instruction
mentioned in this chapter during installation. Information about specification of circuit
breaker, fuse, EMI filter selection, and selection of regenerative resistor are also
included.
11111111111111111111111111111111111111111111 1111111
2.1 Notes ······························································································ 2-2
2.2 Ambient Conditions of Storage ····························································· 2-2
2.3 Ambient Conditions of Installation ························································· 2-2
2.4 Installation Direction and Space ···························································· 2-3
2.5 Specification of Circuit Breaker and Fuse ················································ 2-5
2.6 EMI Filter Selection ············································································ 2-5
2.7 Selection of Regenerative Resistor ························································ 2-7
To Next Page
Loading...
