Delta ASDA-M Series User Manual

ASDA-M Chapter 8 Parameters
Revision December, 2014 8-49
P1-10 SP2
Internal Speed Command 2／Internal
Speed Limit 2
Address: 0114H
0115H
Parameter
Attribute：
Parameter for individual axis
Related Section:
Section 6.3.1
Operational
Interface：
Panel / Software Communication
Default：
2000
Control
Mode：
S／T
Unit：
0.1r/min
Range：
-60000 ~ +60000
Data Size：
32bit
Format：
DEC
Example：
Internal Speed Command: 120 = 12 r/min
Internal Speed Limit: Positive value and
negative value is the same. Please refer
to the following description.
Settings：
Internal Speed Command 2: The setting of the second internal
speed command
Internal Speed Limit 2: The setting of the second internal speed
limit
Example of inputting internal speed limit:
Speed limit
setting
value of
P1-10
Allowable
Speed
Range
Forward
Speed Limit
Reverse
Speed Limit
1000
-100 ~ 100
r/min
100 r/min -100 r/min
-1000
P1-11 SP3
Internal Speed Command 3／Internal
Speed Limit 3
Address: 0116H
0117H
Parameter
Attribute：
Parameter for individual axis
Related Section:
Section 6.3.1
Operational
Interface：
Panel / Software Communication
Default：
3000
Control
Mode：
S／T
Unit：
0.1r/min

Delta ASDA-M Series Specifications

General

Brand	Delta
Model	ASDA-M Series
Category	Servo Drives
Language	English