Delta ASDA-M Series User Manual

ASDA-M Chapter 8 Parameters
Revision December, 2014 8-69
Range：
0 ~ 65535
Data Size：
16bit
Format：
DEC
Settings：
In speed mode, when the deviation between the speed feedback
and the command is smaller than the setting value of P1-47 and
exceed the setting time of P1-49, DO: SP_OK is ON. Whenever
the deviation exceeds the setting range of P1-47, the time count
will be reset.
P1-50 Reserved
Address: 0164H
0165H
P1-51 Reserved
Address: 0166H
0167H
P1-52 RES1 Regenerative Resistor Value
Address: 0168H
0169H
Parameter
Attribute：
Parameter for three axes
Related Section:
Section 2.7
Operational
Interface：
Panel / Software Communication
Default：
Determined by the model. Please refer to
the following table.
Control
Mode：
ALL
Unit：
Ohm
Range：
10 ~ 750
Data Size：
16bit
Format：
DEC
Settings：
Model Default
1.5 kW (included)
or below
40 Ω
2 kW 20 Ω

Delta ASDA-M Series Specifications

General

Brand	Delta
Model	ASDA-M Series
Category	Servo Drives
Language	English