Chapter 4 Application Techniques ASDA Series Application Note
4-34 March, 2015
Failure Code F0F1h
When executing this macro, E-Cam is not engaged. E-Cam has to
engage to change the engaged position.
Failure Code F0F2h
The setting value of P5-93.YX (PR number of going trip) exceeds the
range: 0 ~ 0x3F
Failure Code F0F3h
The setting value of P5-93.UZ (PR number of return trip) exceeds the
range: 0 ~ 0x3F
Failure Code F0F5h
The setting value of P5-95 (Available forward rate) exceeds the range:
0 ~ 100 (%)
Failure Code F0F6h
The setting value of P5-96 (alignment target position) exceeds the
range: 0 ~ (P5-84/P5-83) - 1
To Next Page
Loading...
