Delta ME300 Series - Page 421

Chapter 14 Fault Codes and Descriptions
ME300
14-26
No. Display on LED Keypad Fault Name Fault Descriptions
33
U-phase error
(cd1)
U-phase current detection error when power is ON.
Action and Reset
Action condition Hardware detection
Action time cd1 acts immediately when the drive detects the fault.
Fault treatment parameter N/A
Reset method Power-off
Reset condition N/A
Record Yes
Cause Corrective Actions
Hardware failure
Cycle the power.
If the fault code still displays on the keypad, return to the factory for repair.
No. Display on LED Keypad Fault Name Fault Descriptions
34
V-phase error
(cd2)
V-phase current detection error when power is ON.
Action and Reset
Action condition Hardware detection
Action time cd2 acts immediately when the drive detects the fault.
Fault treatment parameter N/A
Reset method Power-off
Reset condition N/A
Record Yes
Cause Corrective Actions
Hardware failure
Cycle the power.
If the fault code still displays on the keypad, return to the factory for repair.
No. Display on LED Keypad Fault Name Fault Descriptions
35
W-phase error
(cd3)
W-phase current detection error when power is ON.
Action and Reset
Action condition Hardware detection
Action time cd3 acts immediately when the drive detects the fault.
Fault treatment parameter N/A
Reset method Power-off
Reset condition N/A
Record Yes
Cause Corrective Actions
Hardware failure
Cycle the power.
If the fault code still displays on the keypad, return to the factory for repair.