Delta ME300 Series - Page 422

Chapter 14 Fault Codes and Descriptions
ME300
14-27
No. Display on LED Keypad Fault Name Fault Descriptions
36
cc Hardware failure
(Hd0)
cc (current clamp) hardware protection error when
power is ON.
Action and Reset
Action condition Hardware detection
Action time Hd0 acts immediately when the drive detects the fault.
Fault treatment parameter N/A
Reset method Power-off
Reset condition N/A
Record Yes
Cause Corrective Actions
Hardware failure
Cycle the power.
If the fault code still displays on the keypad, return to the factory for repair.
No. Display on LED Keypad Fault Name Fault Descriptions
37
oc Hardware failure
(Hd1)
oc hardware protection error when power is ON.
Action and Reset
Action condition Hardware detection
Action time Hd1 acts immediately when the drive detects the fault.
Fault treatment parameter N/A
Reset method Power-off
Reset condition N/A
Record Yes
Cause Corrective Actions
Hardware failure
Cycle the power.
If the fault code still displays on the keypad, return to the factory for repair.