Delta RTU-ECAT - Page 39

RTU-ECAT Operation Manual
6-10
_6
 Error list（Extension module error information）
Bit Description
Error list[0]
The error code in the 1
st
special module on the right of RTU-ECAT;
the error code value
is the value in the error status CR of the special module. For details, refer to error
status CRs in DVP-PLC Application Manual: Special Modules.
Error list[1]
The error code in the 2
nd
special module on the right of RTU-ECAT; the error code
value is the value in the error status CR of the special module. For details, refer to
error
status CRs in DVP-PLC Application Manual: Special Modules.
Error list[2]
The error code in the 3
rd
special module on the right of RTU-ECAT
; the error code value
is the value in the error status CR of the special module. For details, refer to error
status CRs in DVP-PLC Application Manual: Special Modules.
Error list[3]
The error code in the 4
th
special module on the right of RTU-ECAT
; the error code value
is the value in the error status CR of the special module. For details, refer to error
status CRs in DVP-PLC Application Manual: Special Modules.
Error list[4]
The error code in the 5
th
special module on the right of RTU-ECAT
; the error code value
is the value in the error status CR of the special module. For details, refer to error
status CRs in DVP-PLC Application Manual: Special Modules.
Error list[5]
The error code in the 6
th
special module on the right of RTU-ECAT
; the error code value
is the value in the error status CR of the special module. For details, refer to error
status CRs in DVP-PLC Application Manual: Special Modules.
Error list[6]
The error code in the 7
th
special module on the right of RTU-ECAT
; the error code value
is the value in the error status CR of the special module. For details, refer to error
status CRs in DVP-PLC Application Manual: Special Modules.
Error list[7]
The error code in the 8
th
special module on the right of RTU-ECAT
; the error code value
is the value in the error status CR of the special module. For details, refer to error
status CRs in DVP-PLC Application Manual: Special Modules.