Denon AVR-1311 User Manual

14
ENGLISH
Connecting a Blu-ray Disc player / DVD player
• You can enjoy video and audio from a Blu-ray Disc or DVD.
• Select the connector to use and connect the device.
• For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage12).
NOTE
• If the DVD VIDEO input connector is to be used, be sure to connect the MONITOR output connector of
the unit and the VIDEO input connector of the TV, using a video cable.
• If the DVD COMPONENT VIDEO input connectors are to be used, be sure to connect the COMPONENT
MONITOR output connectors of the unit and the COMPONENT VIDEO input connectors of the TV, using
a component video cable.
Cables used for connections
Video cables (sold separately)
Video cable
(Yellow)
Component
video cable
(Green)
(Blue)
(Red)
Audio cable (sold separately)
Audio cable
(White)
(Red)
R
L
R
L
R
L
R
L
"6%*0
"6%*0
3-
065
*/
7*%&0
7*%&0
$0.10/&/57*%&0
:1# 13
*/
Blu-ray Disc player /
DVD player
Set this to change the digital input connector or component video input connector to which the input
source is assigned.
“Input Assign” (vpage33)
in Set as Necessary
For HD audio (Dolby TrueHD, DTS-HD, Dolby Digital Plus and DTS Express) playback, connect with HDMI
(vpage12 “Connecting an HDMI-compatible device”).
Connecting a set-top box (Satellite tuner/cable TV)
• You can watch satellite or cable TV.
• Select the connector to use and connect the device.
• For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage12).
NOTE
• If the SAT/CBL VIDEO input connector is to be used, be sure to connect the MONITOR output connector
of the unit and the VIDEO input connector of the TV, using a video cable.
• If the SAT/CBL COMPONENT VIDEO input connectors are to be used, be sure to connect the
COMPONENT MONITOR output connectors of the unit and the COMPONENT VIDEO input connectors
of the TV, using a video cable.
Cables used for connections
Video cables (sold separately)
Video cable
(Yellow)
Component
video cable
(Green)
(Blue)
(Red)
Audio cables (sold separately)
Audio cable
(White)
(Red)
R
L
R
L
Coaxial
digital cable
(Orange)
R
L
R
L
7*%&0
$0.10/&/57*%&0
:1# 13
065
"6%*0
"6%*0
3-
065
065
7*%&0
065
$0"9*"-
Satellite Tuner/Cable TV
Set this to change the digital input connector or component video input connector to which the input
source is assigned.
“Input Assign” (vpage33)
in Set as Necessary
1.AVR1311E2ENG3rd100617.inddSec:141.AVR1311E2ENG3rd100617.inddSec:14 2010/06/1718:24:132010/06/1718:24:13

Denon AVR-1311 Specifications

General

Number of Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
Response Bandwidth	10 Hz - 100 kHz
Signal-To-Noise Ratio	98 dB
Total Harmonic Distortion	0.08%
Input Impedance	47 kOhms
Input Sensitivity	200 mV
Tuner Bands	AM/FM
Preset Station Qty	56
HDMI Switching	Yes
3D Technology	Yes
HDMI Pass-Through	Yes
Frequency Response	10 Hz - 100 kHz
Power Output	75 W per channel (8 ohms, 20 Hz - 20 kHz, THD 0.08%)
Dolby Formats	Dolby Digital, Dolby Pro Logic II
DTS Formats	DTS-HD Master Audio
Tuner Type	FM/AM
Speaker Impedance	6 - 16 ohms
Weight	8.3 kg