Denon AVR-1311 User Manual

33
ENGLISH
Basic versionSimple version InformationAdvanced version
Important information
n About the display of input sources
In this section, the confi gurable input sources for each item are shown as follows.
BD
DVD TV SAT/CBL GAME V.AUX DOCK TUNER
Input Assign
Default settings are underlined.
Input assignments menu operations
1
Use ui to select the menu you want to set.
2
Use o p to select the input connector to be assigned.
3
Press ENTER to enter the setting.
NOTE
If all “Digital” assignment of the TV source are set to “None”, TV source cannot be selected with the input
source selection.
Setting items Setting details
Opt (Optical)
Set this to change the
optical (digital) input
connectors assigned to the
input sources.
BD DVD TV
SAT/CBL GAME
V.AUX DOCK
OFF : Select when an optical input connector is not to be used.
• At time of purchase, the settings of the different input sources are as
shown below.
Input source BD DVD TV
SAT/
CBL
GAME V.AUX DOCK
Default
setting
–– Opt ––––
Coax (Coaxial)
Set this to change the
coaxial (digital) input
connectors assigned to the
input sources.
BD DVD TV
SAT/CBL GAME
V.AUX DOCK
OFF : Select when a coaxial input connector is not to be used.
• At time of purchase, the settings of the different input sources are as
shown below.
Input source BD DVD TV
SAT/
CBL
GAME V.AUX
DOCK
Default
setting
––– Coax –––
Input Setup
Perform settings related to input source playback.
You do not have to change the settings to use the unit. Make settings when needed.
Menu operation
1
Press MENU.
The menu is displayed on the display of this unit.
2
Use ui to select “Input Setup”, and then press ENTER.
3
Use ui to select the menu to be set or operated, and then press
ENTER.
4
Use ui to register the settings or use o p to change the
settings.
• To return to the previous item, press RETURN.
• Exiting the Menu, press MENU while the menu is displayed.
The menu returns to normal display.
Items that can be set with the “Input Setup” procedure
Input Assign (vpage33)
Auto Preset (vpage34)
Preset Skip (vpage34)
Video Select (vpage34)
Input Mode (vpage34)
Source Level (vpage35)
Playback Mode (vpage35)
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right)
Confi rm the setting Return to previous menu
1.AVR1311E2ENG3rd100617.inddSec:331.AVR1311E2ENG3rd100617.inddSec:33 2010/06/1718:24:202010/06/1718:24:20

Denon AVR-1311 Specifications

General

Number of Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
Response Bandwidth	10 Hz - 100 kHz
Signal-To-Noise Ratio	98 dB
Total Harmonic Distortion	0.08%
Input Impedance	47 kOhms
Input Sensitivity	200 mV
Tuner Bands	AM/FM
Preset Station Qty	56
HDMI Switching	Yes
3D Technology	Yes
HDMI Pass-Through	Yes
Frequency Response	10 Hz - 100 kHz
Power Output	75 W per channel (8 ohms, 20 Hz - 20 kHz, THD 0.08%)
Dolby Formats	Dolby Digital, Dolby Pro Logic II
DTS Formats	DTS-HD Master Audio
Tuner Type	FM/AM
Speaker Impedance	6 - 16 ohms
Weight	8.3 kg