Denon AVR-1311 User Manual

39
ENGLISH
Basic versionSimple version InformationAdvanced version
Information
Information on the main unit’s various settings (Status) and on input
signals (Audio Input Signal) is shown on the display.
The information displayed changes each time you press STATUS.
The information is displayed for several seconds before the display
returns to its original condition.
GItems to be checkedH
• Input source
• Surround mode
• Input digital terminal
• Input mode
• Decode mode
• Video select
• Dialogue normalization
etc.
NOTE
The information displayed differs according to the input source.
Dialogue normalization function
This function is automatically activated when playing Dolby Digital
sources.
It automatically corrects the standard signal level for individual
program sources.
The correction value can be checked using
STATUS.
The fi gure is the corrected
value. This cannot be
changed.
1.AVR1311E2ENG3rd100617.inddSec:391.AVR1311E2ENG3rd100617.inddSec:39 2010/06/1718:24:222010/06/1718:24:22

Denon AVR-1311 Specifications

General

Number of Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
Response Bandwidth	10 Hz - 100 kHz
Signal-To-Noise Ratio	98 dB
Total Harmonic Distortion	0.08%
Input Impedance	47 kOhms
Input Sensitivity	200 mV
Tuner Bands	AM/FM
Preset Station Qty	56
HDMI Switching	Yes
3D Technology	Yes
HDMI Pass-Through	Yes
Frequency Response	10 Hz - 100 kHz
Power Output	75 W per channel (8 ohms, 20 Hz - 20 kHz, THD 0.08%)
Dolby Formats	Dolby Digital, Dolby Pro Logic II
DTS Formats	DTS-HD Master Audio
Tuner Type	FM/AM
Speaker Impedance	6 - 16 ohms
Weight	8.3 kg