Denon AVR-1311 User Manual

47
ENGLISH
Basic version Advanced versionSimple version Information
Surround
Surround mode (vpage23)
Surround Parameter (vpage36)
Tone (vpage38)
RESTORER z7
(vpage38)
AFDM z6 (vpage37) S.Back (vpage37) Subwoofer (vpage37)
PRO LOGIC g/gx Music mode only
NEO:6 Music mode only
Panorama (vpage37) Dimension (vpage37) Center Width (vpage37) Center Image (vpage37)
DIRECT (2 channel)
S
z2
DIRECT (Multi-channel)
STEREO
SS
MULTI CH IN
SS S
DOLBY PRO LOGIC gx S SSS SS
DOLBY PRO LOGIC g S SSS SS
DTS NEO:6
S SSS
DOLBY DIGITAL
SS S
DOLBY DIGITAL Plus
SS S
DOLBY TrueHD
SS
DTS SURROUND
SS S
DTS 96/24
SS S
DTS-HD
SS
DTS Express
SS S
MULTI CH STEREO
S SS
VIRTUAL
SS
z2 Only when “Mode” is set to “LFE+Main” (vpage8), sound is output from the subwoofer.
z6 This item can be selected when a Dolby Digital or DTS or DVD-Audio signal is played.
z7 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
1.AVR1311E2ENG3rd100617.inddSec:471.AVR1311E2ENG3rd100617.inddSec:47 2010/06/1718:24:232010/06/1718:24:23

Denon AVR-1311 Specifications

General

Number of Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
Response Bandwidth	10 Hz - 100 kHz
Signal-To-Noise Ratio	98 dB
Total Harmonic Distortion	0.08%
Input Impedance	47 kOhms
Input Sensitivity	200 mV
Tuner Bands	AM/FM
Preset Station Qty	56
HDMI Switching	Yes
3D Technology	Yes
HDMI Pass-Through	Yes
Frequency Response	10 Hz - 100 kHz
Power Output	75 W per channel (8 ohms, 20 Hz - 20 kHz, THD 0.08%)
Dolby Formats	Dolby Digital, Dolby Pro Logic II
DTS Formats	DTS-HD Master Audio
Tuner Type	FM/AM
Speaker Impedance	6 - 16 ohms
Weight	8.3 kg