EasyManuals Logo

Denon AVR-1507 Operating Instructions

Denon AVR-1507
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
ENGLISH
20
ENGLISH
Sources recorded in stereo
Sources recorded in monaural
DIRECT / STEREO
•Effective for achieving pure playback.
If there is no need for tone control or distribution of the low
frequencies in function of the speaker configuration, select
the DIRECT mode to achieve the best sound quality.
DENON Original Surround Modes ( page 27, 28)
Select these for 7.1-channel playback with sources
recorded in stereo or monaural.
•The effects are different for each of the surround modes.
Select the one most suited for the source being used.
DTS NEO:6 ( page 23)
This is a surround mode for playing 6.1- or 7.1-channel
stereo sources developed by Digital Theater Systems.
One of two playing modes, MUSIC (for music sources) or
CINEMA (for movie sources), can be selected according to
your preferences.
DOLBY PRO LOGIC IIx
*
( page 22)
Developed by Dolby Laboratories, this surround mode
provides 7.1-channel surround sound with conventional
stereo (2-channel) sources.
Select CINEMA mode for movie surround soundtracks,
MUSIC for music sources, and GAME for 2-channel game
box audio sources.
Basic Operation Basic Operation
Surround modes marked with an asterisk (*) cannot be used when
the surround back speaker is set to “NONE”.
The “+PLIIx Cinema” mode cannot be selected when only one
surround back speaker is being used.
¢ DIRECT mode
This mode is for playing with high quality sound. The audio signals are
transmitted directly, without passing through the tone circuits, etc.
Selecting the play mode (DIRECT/STEREO)
The AVR-1507 is equipped with two 2-channel playback modes
exclusively for music. Select the mode to suit your tastes.
Press
[
DIRECT/STEREO
]
to select “DIRECT”.
STEREODIRECT
¢ STEREO mode
Use this mode to adjust the tone and achieve the desired sound.
Press
[
DIRECT/STEREO
]
to select “STEREO”.
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
ENTER
[STATUS]
D H F G
INPUT MODE
D H F G
SURROUND
PARAMETER
[STANDARD]
[DIRECT/STEREO]
ENTER
SURROUND
PARAMETER
<SURROUND BACK> D HD H
F G, ENTER
INPUT MODE

Table of Contents

Other manuals for Denon AVR-1507

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-1507 and is the answer not in the manual?

Denon AVR-1507 Specifications

General IconGeneral
Digital Inputs2 Optical, 1 Coaxial
Analog Inputs5
TunerAM/FM
Response Bandwidth10 Hz - 100 kHz
Signal-To-Noise Ratio98 dB
Total Harmonic Distortion0.08%
Input Sensitivity200 mV
Digital Sound Processor (DSP)Yes
HDMI SwitchingNo
Tuner Frequency RangeFM: 87.5 - 108 MHz, AM: 522 - 1611 kHz
Surround SoundDolby Digital, DTS, Dolby Pro Logic II
Input Impedance47 kOhm
Power Output75 W per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
DSP Presets5-channel stereo, Cinema EQ

Related product manuals