ENGLISH
38
ENGLISH
Advanced Setup – Part 1 Advanced Setup – Part 1
Press
FF GG
to set.
• Digital input terminal assignment not possible for “TUNER”.
• It is not possible to make the Digital In Assignment settings for the
function assigned at iPod Assignment mode.
Setting the iPod Assignment
It is possible to assign the Control Dock for iPod’s (ASD-1R, sold
separately) audio and video signals to any input terminals on the AVR-
1507 and play them.
1
OFF:
This is the factory default setting.
CD, AUX, CD-R:
When using a Control Dock for iPod, it is possible to connect with
the audio input terminal of the assigned function.
DVD, TV, VCR, V.AUX:
When using a Control Dock for iPod, it is possible to connect with
the audio and video input terminals of the assigned function.
Press ENTER or
HH
to enter the setting and switch to
the Audio Delay setting.
2
3
Input Setup
Setting the Digital In Assignment
Press
FF GG
to select “2. In”, then press ENTER.
Press ENTER or
HH
to enter the setting and switch to
the iPod Assignment setting.
Press
DD HH
to select the input terminals, then press
FF
GG
to set.
2
1
CD, AUX, DVD, TV, VCR, V.AUX, CD-R:
Assign the different source according to the devices connected to
the AVR-1507’s input terminals.
3
This assigns the different input sources for the digital input terminals.
2
Setting the Audio Delay
Adjust the time delay between the video and audio signals.
Press
FF GG
to set.
Press ENTER or
HH
to enter the setting and switch to
the EXT. IN Subwoofer Level setting.
1
2
0 ms ~ 200 ms:
Adjust the time delay.
With a movie source, for example, adjust so that the movement
of the actors’ lips is synchronized with the sound.
• By default, this menu is not displayed when no digital signals are
being input.
• The audio delay setting does not apply when playing in the EXT. IN
mode or in the analog input direct mode or stereo mode (Front
speaker setting “Large”).
6 A . D e l a y 2 0 0 m s
To Next Page
Loading...
Need help?
General
