Denon AVR-1507 Operating Instructions

Basic Operation Basic Operation
32
ENGLISH
ENGLISH
TP search
Use this function to find RDS stations broadcasting traffic programs
(TP stations).
Use
<
INPUT SELECTOR
>
to select “TUNER” or press
[TUNER].
Press CHANNEL.
• TP search begins automatically.
If no TP station is found with the above operation, all the reception
bands are searched.
The station name is displayed on the display after searching
stops.
Press
<
RDS
>
until “TP SEARCH” appears on the
display.
To continue searching, repeat step 3.
If no other TP station is found when all the frequencies have
been searched, “NO PROGRAMME” is displayed.
1
2
3
4
RT (Radio Text)
“RT” appears on the display when radio text data is received.
Use
<
INPUT SELECTOR
>
to select “TUNER” or press
[TUNER].
Press
<
RT
>
.
While receiving an RDS broadcast station, the text data
broadcast from the station is displayed.
To turn the display off, press
<
RT
>
again.
If no text data is being broadcast, “NO TEXT DATA” is displayed.
1
2
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
[ENTER]
[NIGHT]
CHANNEL
[D H F G]
INPUT SELECTOR
USER MODE
[VIDEO SELECT]
[D H F G]
[TUNER]
[ENTER]
INPUT SELECTOR
USER MODE
INPUT SELECTOR
<RDS>CHANNEL <RT>

Denon AVR-1507 Specifications

General

Digital Inputs	2 Optical, 1 Coaxial
Analog Inputs	5
Tuner	AM/FM
Response Bandwidth	10 Hz - 100 kHz
Signal-To-Noise Ratio	98 dB
Total Harmonic Distortion	0.08%
Input Sensitivity	200 mV
Digital Sound Processor (DSP)	Yes
HDMI Switching	No
Tuner Frequency Range	FM: 87.5 - 108 MHz, AM: 522 - 1611 kHz
Surround Sound	Dolby Digital, DTS, Dolby Pro Logic II
Input Impedance	47 kOhm
Power Output	75 W per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
DSP Presets	5-channel stereo, Cinema EQ