19
ENGLISH
Advanced versionSimple version InformationBasic version
Playback (Basic operation)
n Playing a Blu-ray Disc player/DVD player
(vpage20)
n Playing an iPod
®
(vpage21)
n Tuning in radio stations (vpage23)
Selecting a listening mode (Surround mode)
(vpage24)
n Selecting the input source (vpage19)
n Adjusting the master volume (vpage20)
n Turning off the sound temporarily (vpage20)
Playback (Advanced operation) (vpage32)
Important information
Before starting playback, make the connections between the different
components and the settings on the receiver.
NOTE
Also refer to the operating instructions of the connected components
when playing them.
Selecting the input source
Press the input source select button
(iPod, DVD, BD, TUNER, DOCK, SAT/
CBL
, GAME, V.AUX, TV) to be played
back.
The desired input source can be selected
directly.
• When iPod PLAY is pressed, the input
source of this unit is switched to “DOCK”
and the connected iPod is automatically
played (vpage22 “iPod play function”).
You can also use the following operation to select an input
source.
Connecting an external control
device
REMOTE CONTROL jacks
If this unit is installed in a location that is out of range of the signal
from the remote control unit, you can still operate the unit and the
devices connected to it by using a commercially available IR receiver.
You can also use it to remotely control ZONE2 (another room).
AUX
OUT
Device equipped with a
REMOTE CONTROL IN jack
Infrared
retransmitter
Infrared
sensor
Output
Input
To Next Page
Loading...
Need help?
General
Weight and Dimensions
